AngelTrax MiniMicro Plus MDVR Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Digitální videorekordéry (DVR) AngelTrax MiniMicro Plus MDVR. MiniMicro Plus with VSM Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 4
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
The systems required must meet the following minimum requirements: MINIMICRO PLUS with
VSM
CAMERAS
Cameras shall include the following:
Shatterproof lenses
Omni Position
Anti-Glare Glass
Scratch resistant
High Impact
Microphones with built-in Noise Gate Omni Direction
Moisture Proof
Temperature resistant
520 TV Line Resolution
Cameras must be fixed in cast metal vandal proof housing
PeriOptic Wide Dynamic Lens
CX3 Sony Chip Set Only
Identify appropriate camera and lenses to have full view of bus areas (front, back, driver,
stairwell section, and stop arm)
Day/Night camera shall have built-in Infrared LEDs.
Input image to DVR shall be Clear, Stable and Free of Vibration.
Shall be mounted without brackets to Ceiling, Surface, Wall, or Side.
Shall be available in various lens sizes range of 2.1mm to 25mm
Must have 6PIN DIN waterproof connection
MOBILE DVR
Footprint not to exceed (Width x Height x Depth) 4x 2” x 8” and Weight not to exceed 1.61
lbs.
The DVR shall have the capability to be installed at any angle, in an easily accessible
location.
The DVR supplied must record independently up to four channels of video and four
channels of audio, with simultaneous recording.
The DVR must have easy marking capabilities with an Event Push Button.
The DVR should have protection from access of unauthorized personnel by not having any
accessible controls or buttons on the DVR face and should offer a wireless remote control
for easy set up and programming by any authorized personnel.
The 2.5” Hard Drive shall have a minimum storage capacity of 160GB with maximum of
500GB. The Hard drive, must be “hot swappable (the hard drive may be removed and
replaced with the power on and the DVR in operation without damage). The Hard Drive
must be Tamper proof and lockable and in a shock resistant housing.
The system must utilize a non-proprietary High Speed SATA Hard Drive
The DVR must operate between 10-36 VDC and be connected with 18 gauge wire or
larger, with an inline fuse and be internally and continually protected from power surges,
spikes and reverse polarity.
The DVR must offer a back-up battery that will save settings for a minimum of 10 years.
The DVR must be equipped with an RS-232 Serial Port for future expansions. This port
must be able to interface with any device that accepts serial communications. It must also
include a LAN connection for wireless capability.
The Camera Connectors on the DVR must be 6 pin DIN; with screw on connectors that
include Audio, Video, Power and Ground with Water Proof connectors.
The DVR unit must offer High and Low Temperature Protection
The DVR must offer the latest MPEG4 and MJPEG compression technology providing
motion picture quality video and be user selectable to ensure the best quality video.
The DVR Frame Rate must offer 9 settings at 1, 3, 5, 7, 10, 12, 15, 30, 60 fps.
The DVR unit must offer crisp video at 720 x 584 resolutions for DVD quality playback.
Zobrazit stránku 0
1 2 3 4

Shrnutí obsahu

Strany 1 - MOBILE DVR

The systems required must meet the following minimum requirements: MINIMICRO PLUS with VSM CAMERAS Cameras shall include the following: Shatterp

Strany 2

The DVR Recording modes must be user selectable for Continuous, Motion or Alarm. In continuous mode, the storage capacity must not be impacted by m

Strany 3

The DVR must be equipped with a USB memory stick process to quickly review or download events from the on-board system. The Video retrieval or r

Strany 4

The bidder shall supply complete user training on the system and its installation, including online and current manufacturer user manuals. The bid

Komentáře k této Příručce

Žádné komentáře